Mia Yang

Sales Executive

Fixed knot field fence (also called grassland or farm knotted fence) is the ideal fencing for pasture livestock containment and farm boundary division. Compared with cumbersome section steel fences, its service life, rust resistance and cost depend on three key factors: steel wire quality, professional galvanized anti-rust treatment, and site-matched mesh specifications.

Avoid choosing products simply by low prices. Cheap unqualified fences rust and break easily, failing to restrain livestock and requiring frequent repairs or replacements, which causes higher long-term costs. This guide clarifies the performance and selection rules of fixed knot field fence, helping purchasers, designers and constructors avoid common pitfalls, utilize budgets reasonably and select durable, cost-effective fencing.

---

What Is Fixed Knot Field Fence?

Fixed knot field fence is auto-woven with high-tensile galvanized steel wire. Its special lock-knot design balances flexibility and stability.

Unlike welded mesh that cracks at welds, it slightly deforms to buffer livestock impacts and adapts to uneven terrain; local damage won’t split the whole panel.

Its durability relies on wire tensile strength, galvanized coating, mesh spacing and thick top/bottom edge wires, offering good tension, UV and corrosion resistance. Widely used for pastures, livestock pens, forest and roadside fencing.

---

Professional Procurement Will Do What?

Premature fence failure rarely stems from shoddy workmanship, but mismatched specifications chosen without evaluating project conditions. Many buyers only check wire diameter and mesh size, ignoring harsh field conditions: long outdoor exposure, saline-alkali ground and frequent trampling by cattle. The fence quickly deteriorates, risking livestock escape and raising material & upkeep costs.

Custom-fit fencing fits your land perfectly: balanced mesh weight and post load to hit safety standards. For damp, saline-alkali ground or heavy cattle trampling, hot-dip galvanized fences with thick edge wires last 3–5x longer than standard types and cut repair & replacement expenses sharply. Standard rolls come in 50m or 100m lengths, minimizing on-site cutting and splicing to accelerate construction and cut labor costs.

---

Main Types of Fixed Knot Field Fence & Performance Differences

---

How to Select Key Procurement Parameters

The core rule for choosing fixed knot field fence is matching specifications to your application scenarios—do not blindly pursue ultra-thick wire or rock-bottom prices. Key parameters sorted below for reference:

Wire Diameter Matching

Fixed-knot farm fencing uses graded wire sizes: 2.5mm top/bottom load edges and 2.0mm inner mesh, balancing durability and cost.

①    Reinforced edge wire version: Dedicated for large livestock such as cattle and horses with superior anti-ramming and anti-traction performance, the top choice for commercial cattle farms.

②    Regular wire gauge version: For sheep, deer and grassland zoning, offering unmatched cost efficiency.

③    Thin-wire economy version: Only fit for simple isolation of mountain greenery; never use it to enclose adult cattle.

Mesh Spacing Selection

Vertical wire spacing options: 6/8/10/11/13/14/15cm; Horizontal wire spacing options: 15/18/20/40/50/60/65cm

①    Small mesh openings: Stop calves and lambs from escaping and block wild animal intrusions, essential for breeding ranches and deer farms.

②    Medium mesh openings: Balance ventilation and visibility, sufficient for general grazing pastures and farm boundary demarcation.

③    Large mesh openings: Consume less raw material with high light transmission, the first pick for extensive mountain land and soil & water conservation barriers.

Simple mnemonic: Smaller mesh = better livestock containment; Larger mesh = lower cost & higher light penetration.

Fence Height & Roll Length

Finished heights cover 0.8m to 1.5m. Pick 1.2m or 1.5m tall versions for adult cattle, and 0.8m / 0.9m short models for lambs and fawns; custom sizes available on request. Standard roll lengths are 50m and 100m, and custom lengths reduce material waste from on-site cutting.

Galvanization Coating Selection Tips

Prioritize heavy-layer hot-dipped galvanization! Opt for high zinc coating weight for coastal and saline-alkali pastures to drastically slow rust formation and extend service lifespan.

---

Delivery Inspection Checklist

Check the goods immediately upon arrival: tight, non-loose fixed knots, flat mesh surface, intact galvanized coating with no exposed steel wire or sharp burrs. For custom orders, cross-verify wire diameter, mesh spacing and roll length—reject shipments failing to meet specified parameters.

---

Conclusion

• Facebook
• LinkedIn

Search

搜索

---

• Getting to Know Gabion Mesh: Its Applications and Advantages
• What is ASTM A123?
• What are the material choices for blade barbed wire manufacturing?
• Welded Wire Mesh vs Chain Link Mesh: How to Choose?
• HESCO Defensive Barriers: Production Process & Applications